VCGT 220530-MN

Ordernumber

5173008

Indexable insert for 3D milling and 90 degree shoulder milling

Positive, 2-edged and uncoated indexable insert with fine-grained substrate for milling non-ferrous metals, aluminium and aluminium alloys with Si content

< 6 %. Very smooth cutting behaviour thanks to specially designed positive insert geometry, high-precision cutting edge in terms of sharpness and surface finish to prevent built-up edge formation.

Product data

chip breaker Description of chip breaker (z.B.: MP= medium application steel , RKH= roughing application cast ironHFC, FMP= Fine and medium application steel,...)	MN
grade Description of cutting grade (f.e. BCP25M, BCK20M, BCP20T, etc.).	BWN10M
delivery quantiy min The minimum delivery quantity must be fulfilled for an order.	10
name of tool system Description of the tool system.	ISO Plunge 90P
N1 main N – Non ferrous materials, N1 Material classification: 3.0205 (Al99) 3.0305 (Al99.9) 3.0505 (AlMn0.5Mg0.5) 3.0915 (AlFeSi) 3.1255 (AlCuSiMn) 3.1325 (AlCuMg1) 3.1645 (AlCuMgPb) 3.1734 (AlCu4Mg1.5Ni2)	1 200 - 2 400
N2 main N – Non ferrous materials, N2 Material classification: 3.2134 (G-AlSi5Cu1Mg) 3.2373 (G-AlSi9Mg) 3.2383 (G-AlSi10MgCu) 3.2581 (G-AlSi12) 3.3261 (G-AlMg5Si) 3.3525 (AlMg2Mn0.3) 3.3545 (AlMg4Mn) 3.4345 (AlZnMgCu0.5)	240 - 550
N3 main N – Non ferrous materials, N3 Material classification: 2.0060 (E-Cu57) 2.0240 (CuZn15) 2.0360 (CuZn40) 2.0550 (CuZn40Al2) 2.0855 (CuNi2Si) 2.0978 (CuAl11Ni6Fe6) 2.1086 (G-CuSn10Zn) 2.1188 (CuSn5Pb20-C)	120 - 380
N4 main	400 - 500
corner angles [EPSR]	35
clearance angle main cutting edge [AN]	7
length of cutting edge [L]	22.1
inner circle [IC]	12,7
cutting edge height [S]	5.56
corner radius [RE]	3
insert execution r/n/l [IH] AExecution of indexable insert running direction R= Indexable insert right hand cutting L= Indexable insert left hand cutting N= for both cutting directions	N
insert height [S1]	5.56
cutting material [GRADE] Description of grade(f.e.BCP25M, BCK20M, BCP20T, etc.).	BWN10M
Norm [NSM] Indicates the standard to which the product belongs.	DIN-4000-76
insert size The size of the plate is specified in millimetres.	VCGT 2205
edges/ insert Number of usable cutting edges per indexable insert.	2
insert shape The insert-type describes the shape of the insert. Example: CNMG, DCMT, XCMT etc.	VCGT

2D Drawing

Contact

Name*

E-Mail*

Company

Phone number*

Country*

Message*

Do you have any questions?

Your contact for Cutting:

Boehlerit Service+43 (3862) 300-0 [email protected]

Suitable products

Details